Axial 1/10 Wraith 1.9 Electric 4WD RTR Black

Tower Stock# AXID13LL  •  Manufacturer Stock# AXI90074T2
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Color Availability
Notes from our tech department:


Chassis: Impact resistant high-strength composite plastic full tube
frame, front positioned battery tray for easier access and better
weight distribution, new lower rails and skid plate for added
Drive: Four wheel shaft with WB8 HD Wildboar front and rear
driveshafts with updated design for added strength, center splined
slider floats between each end and has added material which reduces
flex and fatigue
Slipper Clutch: Dual slipper design with pad on each side of spur
gear to increase surface area, 32-pitch gearing for high-torque
Differentials: Bevel gear
Axles: AR44 single piece high-pinion gear 6mm above center for added
ground clearance and better driveshaft angles, optimized gear
ratio reduces axle torque twist, metal gears, one-piece all metal
locker front and rear, larger load bearings used around gear set
reduce flex
Motor: 540 size, 35T brushed, integrated cooling fan
Radio: Spektrum STX2 2-ch
Electronic Speed Control: Dynamite AE-5L, switchable between LiPo and
NiMH batteries with a jumper, LED head light and tail light output
Steering Servo: Tactic TSX45 151ozin high torque, metal gear, dual
ball bearing, chassis mounted
Receiver Box: Accessed under hood, shaped like a V8 engine
Suspension: Multi-link solid axle, 4-link design for rear optimized
to reduce axle steer and torque twist
Shocks: Adjustable oil-filled coil over
LED Lights: AE-5L 2-white-4-white and 2-red
Body: Molded polycarbonate with molded plastic grille, molded inner
fender wells keep dirt from entering chassis
Tires: Licensed Nitto Grappler, large block tread, sticky R35
firmness compound
Wheels: KMC Machete XD229, mounting Bead Diameter 1.02 (26mm) wide,
outer diameter 2.12 (53.9mm), plastic construction with satin
silver finish
Warranty: Horizon Hobby, LLC (Horizon) warrants to the original
purchaser that the product purchased (the Product) will be free
from defects in materials and workmanship at the date of purchase.


RTR Axial Wraith 1.9 110 scale Electric Powered, Radio Controlled
Off-Road Crawler with Radio System, Motor, ESC, LED Lights,
trimmed and painted Body and Instruction Manual


Battery: One 2-3S LiPo battery wIC3 connector, or one 5-9 cell NiMH
battery wIC3 connector
Battery Charger: Compatible with selected battery
AA Batteries: Four for transmitter
LiPo charging bag (if using LiPo battery) tools and track equipment


Length: 17.8 (451.6mm)
Width: 8.8 (223.3mm)
Height: 8.8 (223.3mm)
Weight: 4.65lb (2.1kg)
Ground Clearance: 2.7 (68mm)
Wheelbase: 12.13 (308mm)
Internal Gear Ratio: 2.6:1
Final Drive Ratio: 42:1
Gear Pitch: 32P
Spur Gear: 56T
Pinion Gear: 13T


Available in the following body colors:
Black, AXID13LL
Orange, AXID13NN

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 7x14x3.5mm Fr Bevel Gear 1 AXIC4406
1 5x14x5mm Fr Axle Housing 1 AXIC4407
1 5x11x4mm Fr Axle Housing 1 AXIC0221
2 10x15x4mm Steering Knuckles 1 AXIC0230
2 5x11x4mm Steering Knuckles 1 AXIC0221
2 5x11x4mm Fr Axles 1 AXIC0221
2 7x14x3.5mm R Bevel Gear 1 AXIC4406
1 5x14x5mm R Axle Housing 1 AXIC4407
1 5x11x4mm R Axle Housing 1 AXIC0221
2 10x15x4mm R Uprights 1 AXIC0230
2 5x11x4mm R Uprights 1 AXIC0221
2 5x11x4mm R Axles 1 AXIC0221
4 5x10x4mm Transmission 2 AXIC0218
2 8x16x5mm Transmission 1 AXIC0225

jxs 030119